Audio-Schnittstellen

3rd gen. compact AoIP interface with a mix of Line, AES3, Mic, and GPIO connections, LW+ AES67-compliant, custom mixer included, auto-sensing power supply, 90-240VAC, 50Hz-60Hz, 16W, rackmount kit included

A high-density, all-in-one, edge I/O device for use in control rooms orstudios, at ingest stations, or as a routing and monitoring solution in TOCs and machinerooms, 2 RU, one built-in power supply

Compact Multichannel Bridge, 4x 3G/HD/SD SDI interfaces, 1x DANTE™/AES67 I/O, 1x MADI I/O, 1x MADI I/O optical MM or SM, 1x MADI Out BNC, reference grade clock recovery, 19",1 RU

JK AUDIO RM4: RemoteMix 4 - 4 Mic Inputs & 4 Headphone Jacks - Phone Line Hybrid - Wireless Phone Interface - 48v Phantom Power - HD Voice (Wide-Band Speech)

3rd gen. compact AoIP interface, 4 stereo digital AES3 inputs and 4 stereo digital AES3 outputs, LW+ AES67 compliant, custom mixer included, auto-sensing power supply, 90-240VAC, 50Hz-60Hz, 16W, rackmount kit included

3rd gen. compact Livewire GPIO interface with 6 GPIO ports, dual Ethernet port, auto-sensing power supply, 90-240VAC, 50Hz-60Hz, 7W, rackmount kit included

3rd gen. compact AoIP interface, 4 analogue stereo inputs (or 8 mono) and 4 analogue stereoe outputs (or 8 mono), LW+ AES67 compliant, custom mixer included, auto-sensing power supply, 90-240VAC, 50Hz-60Hz, 16W, rackmount kit included

3rd gen. compact AoIP interface, 4 mic inputs and 8 mono/4 stereo bal. line-level outputs for headphone/monitor feeds, LW+ AES67 compliant, custom mixer included, auto-sensing power supply, 90-240VAC, 50Hz-60Hz, 16W, rackmount kit included

A high-density, all-in-one, edge I/O device for use in control rooms orstudios, at ingest stations, or as a routing and monitoring solution in TOCs and machinerooms, 2 RU, two built-in power supply

2 additional output stream license

Surface-mount kit allows you to mount a single xNode on any vertical or horizontal flat surface

1RU, AES67-compliant HD/SD-SDI to Livewire/AES-67 Audio over IP interface, manages dual, independent HD/SD-SDI paths and can de-embed, shuffle, and re-embed up to 16 channels of audio on each SDI path, allows full routing of channels between SDI and AoIP I/O on each SDI interface, requires one unused Gig-E network port

First purpose-built hardware codec capable of sending/receiving full FM signals at data rates as low as 320 kbps, utilizing the Omnia µMPX™ algorithm, MPX Node''s HTML 5 web GUI makes for simple browser based control using a laptop, tablet or smartphone. 5 in, 5 out GPIO supports flexible remote control. Cool running 1/2 RU form factor, and 12V external power with locking connector

First purpose-built hardware codec capable of sending or receiving full FM signals at data rates as low as 320 kbps, utilizing the Omnia µMPX™ algorithm. The Encoder takes an analog composite FM signal as its input and converts it to a rout-able IP stream, MPX Node''s HTML 5 web GUI makes for simple browser based control using a laptop, tablet or smartphone. 5 in, 5 out GPIO supports flexible remote control. Has two output streams by default. Cool running 1/2 RU form factor, and 12V external power with locking connector

Expands MPX Node Encoder output by four additional streams

Expands MPX Node Encoder output by two additional streams

Enables MPX Node Decoder to receive Multicast streams on supported networks

Adds Omnia µMPX (micro MPX) encoding, allowing you to transport a compressed MPX signal of 320kbps (typical) to an µMPX decoder over an IP link. (Requires MKII upgrade.)

Daptor Two - Drahtloses Telefon-Audio-Interface, XLR Ein-/Ausgang, HD Voice (Breitbad-Sprache)

Compact Node Rack Mount Kit for one or two compact nodes